Description

How does SpeedBox 3.2 work:
– You can activate the SpeedBox 3.2 chip on the display of the e-bike. After pressing the Light or ↑↓↑↓ button, the display will briefly show 99 km/h (62 mph) and from that moment on you are no longer limited.
– To turn off the chip, press the Light or ↑↓↑↓ button again. The display shows 25 km/h (16 mph), and the 25 km/h speed limit will turn back on. The e-bike will operate as it did before the chip was installed.
– We´re also prepared for e-bikes that don´t have a classic control panel with a Walk button. If you want to control your SpeedBox and lights separately, use the arrow combination ↑↓↑↓ and the SpeedBox will activate. You can easily deactivate the SpeedBox in the same way. By pressing the arrows in this order, you can activate and deactivate the SpeedBox at any time, independently of light control.
– To set the maximum speed, you can shift the modes down three levels and then up three levels. The current speed limit will then be displayed. To change the maximum speed, briefly press the Light button or rotate the wheel 360°. The last displayed limit is saved after five seconds of inactivity.
Specifications:
Parameters:
– Activation via: Light / ↑↓↑↓ button
– Maximum speed: unlimited speed
– Speed limit setting: Yes
– Data on screen: actual values
Compatible with engines:
– PW-SE
– PW-X
– PW-TE
– PWX2
– PW-ST
Mounting:
– To connect the SpeedBox chip to an e-bike, we use colored connectors equipped with a key for proper connection, making the chip really easy to install. You can download instructions or watch videos that will guide you through installing the SpeedBox. Removing the chip is as easy as installing it. If you have any connection issues, please don´t hesitate to contact us.
– If you want SpeedBox on a new bike, you must first ride the bike for at least 10 kilometers.